How to make spinning?
Watch the video
Fishing on spinning is very convenient. Many fishermen, knowing this, are trying to get good spinning. However, buying them is not necessary, you can do it yourself. How to make spinning? Now consider this question in detail.
- Coil - it is best to take a stainless steel, this will last longer.
- Carbon fiber tube (you can take any other material that is suitable for the base). To make a spinning length of 2.75 meters, you need 4 meters carbon fiber tube.
- Handle for spinning - can be made from improvised means. Also, it is better to cover it with any rubber material or film so that the hand does not slide later.
You need to put marks on the tube so that the spinning is divided into 5 parts, then cut off these parts, leaving 10 cm between them, which will create a drop when you slide the tubes into each other. After the tube is cut into 5 parts, they need to be thrust into each other in order (that's why we need an additional 10 cm.).Then you need to fix the handle.
Next, you need to attach the coil to the base. Here you can use scotch or buy special holders for coils. Ears for fishing line can also be made of wire or purchase the desired size in the store. All ears should be treated with varnish and let them dry. After that, you need to reel the line, and spinning is ready!
You can also make a spinning, which will consist of a solid base. Such spinning is suitable for fishing from a bridge or from a boat. To make such a spinning, use the previous instructions, but the base does not need to be cut into pieces. Straight on the solid part fasten the reel and ears for the fishing line. The dimensions of the carbon-fiber tube or the material you have chosen are directly proportional to the original dimensions of the finished spinning.
There is still the easiest option. If you do not have enough money or just do not want to buy factory-made spinning, ask the seller about whether there is or defective spinning. Defective spinning you can sell for 15% of its real price. By purchasing two such spinning, the method of manipulation can make one worker and a good spinning, while saving 70%.You can also use your own broken spinning rods and their parts to create a single worker.
Before you do spinning with your own hands, you should remember that every spinning with a coil must have its own center of gravity. This center of gravity should correspond to the place where the coil is attached. The material does not necessarily have to be carbon fiber, you can use light alloy tubes, so-called knitting needles. You can also use wine corks to create a pen. When choosing a material, they immediately calculate what load it can withstand, since ignorance of the maximum load can lead to the fact that you simply break your masterpiece without catching a single fish.
We told how to make homemade spinning. Therefore, master, use your imagination and available tools. To help you offer a video, how to make spinning.