How to pull the radio?
The ordinary head unit is an integral part of any modern car. Its functional state must be monitored constantly. That is what will allow her to increase the service life by several years. If the radio is hopelessly broken, then it is necessary to take appropriate measures to repair it. Not everyone can repair this type of equipment on their own. If you are not among the craftsmen, it is better not to try to climb there, contact the service for repair.
Take out the radio
Currently, the Russian market presents a huge variety of different types of tape recorders. If you are tired of your old radio, you can easily get rid of it by buying a new one. To do this, you will need to pull out the old tape recorder. So, let's look at how to get the radio out of the car.
To pull the radio with the help of available tools as accurately and quickly as possible, you need to use a Phillips screwdriver, an iron ruler, or tweezers, which you can easily hook on the top panel of your radio.It is necessary as much as possible to push the ruler over the plastic pad that protects the inside of the device from all external influences.
The next step in the process of how to pull out a head unit - it is slowly pulling it out of the plastic panel. Most often, it is mounted on four clips. Now we have to unscrew the screws with which the radio tape recorder is attached to the body. After that, we take out the device to ourselves and turn off the radio tape recorder, sipping the blue piles upwards. The antenna is fixed tight enough, so it must be with a little effort to pull over. That's all, the process of how to pull out the radio without keys, completed.
We put a new
This procedure can be performed not only in domestic cars, but also in foreign cars, since almost all the radio tape recorders that are produced on the modern market have a similar structure. Try to take each action as carefully and carefully as possible so as not to scratch or damage the surface of the device, as if you damage it, then there will be no question of further resale. If you are going to replace the old radio with a new one, then try to follow a similar sequence of actions, only in the reverse order.Thus, you put a new radio quickly enough. When you choose a device, try to pay attention to what technical characteristics it has, since it must support all the latest communication standards and have ports for connecting flash media.
Now you know how to pull out the radio tape recorder easily and quickly, for this you do not have to buy additional tools and study the scientific literature.